Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 71)

InstallatIon
MicroEDGE Pro Instruction Manual 807290 2-23
HyPath I/o connectors
HyPath I/o connectors
Notes:
• Isolate all external commons from the chassis ground.
• If external voltage is used to activate I/O, connect the external source’s common to the internal +24 V common.
• HyPath systems have the I/O for each connector printed above the connectors.
Use the following information to create HyPath I/O cables.
The HyPath I/O mating connector is a 37-pin, circular connector:
• Cable connector: AMP 206305-1
• Pin contacts: AMP 66098 (16–18 AWG), AMP 66331 (20–24 AWG)
• Hypertherm kit: 228492
The following pages provide additional specifications and pinout information for the HyPath interface boards.
1
5
10
16
23
29
34
4
9
15
22
28
33
37
HyPath I/o connector
Location of the I/o connectors
J6 I/O 7-12 J7 I/O 1-6
J5 I/O 13-18 J4 I/O 19-24