Grass Valley Kaleido-X v.7.80 - Manual (Page 158)

150
Calibrating the Kaleido-X
Multiviewer Input Calibrations
5 In the Properties pane, type the page number you wish to be the default selection for
Page A, in the Teletext page A selection box. Alternatively, use the slider to set the
page number.
6 Click Apply to all if you wish this setting to be the default Page A selection for every
video signal on your system.
7 Repeat the procedure for the Page B, C, and D elements.
Calibrating Metadata Holding Time
To calibrate metadata holding time
1 In the main window, click the System tab, and then:
• In the case of a Kaleido-IP, click the Calibrations (Kaleido-IP) tab, select the video
or teletext profile you wish to configure, and then click CC Caption holding time,
XDS filtering, DTVCC holding time (for a video profile), or Subtitling holding time
(for a teletext profile).
Note: Alarms can be configured for all four preset pages (see Configuring
Alarm Debouncing on page 175 for instructions on how to configure the
alarms). The Teletext page set as Page A will also be decoded, and its content
can be displayed in a video window.
Note: This section does not apply to the KMV-3901/3911, or Kaleido-XQUAD
multiviewers.