HEIDENHAIN MSE 1000 - Manual (Page 112)

Installation and commissioning examples
Example using DHCP IP address assignment
112 Operating Instructions
10.1.2 Install the end covers
Install end covers Install the left end cover on the left side of the power supply module. Refer to
"Installing end covers", page 21.
Install the right end cover on the right side of the 4-channel EnDat module. Refer to
"Installing end covers", page 21.
10.1.3 Connect the power cord
Connect the power
cord Connect the power cord to the MSE 1201 (ID 747501-01) power cord connector 4 .
Refer to "Connecting a power cord", page 27.
10.1.4 Connect the networking cables
Connect the base
module to the router Connect one end of an RJ-45 network cable to the RJ-45 connection 15 on the
MSE 1184 (ID 747500-01) 1 V
PP
base module. Refer to "Connecting a network
cable", page 28.
Connect the other end of this network cable to one of the LAN ports on the DHCP
router. Refer to the documentation provided with the router for connection location.
Connect to the
workstation to the
router Connect one end of a second RJ-45 network cable to the workstation NIC. Refer to
the documentation provided with the workstation PC for instructions.
Connect the other end of this network cable to one of the LAN ports on the DHCP
router. Refer to the documentation provided with the router for connection location.