HEIDENHAIN MSE 1000 - Manual (Page 52)

Software setup
MSEsetup configuration
52 Operating Instructions
7.4.4 Supervisor mode
Enabling Supervisor mode displays additional data and settings in MSEsetup screens.
The default setting for Supervisor mode is disabled.
Enabling Supervisor mode will display:
System configuration screen
File options
Update firmware
Connect button
Setup screen
Hardware ID in the Module tab
Error compensation in the Channel tab
Mastering screen
«Unapply all» button
Diagnostics screen
CPU temperature in the Module tab
Enable Supervisor
mode To enable Supervisor mode:
Click the «Supervisor mode» button.
Enter the "95148" for the supervisor password.
The updated setting is displayed in the Supervisor mode text box. A message
verifying the action is displayed in the message area.
Disable Supervisor
mode To disable Supervisor mode:
Click the «Supervisor mode» button.
The updated setting is displayed in the Supervisor mode text box. A message
verifying the action is displayed in the message area.