HEIDENHAIN MSE 1000 - Manual (Page 155)

Decommissioning
Disconnect power cords
Operating Instructions 155
13 Decommissioning
NOTICE
Dispose of electronic devices in accordance with local regulations.
13.1 Power-off
MSE 1201
(ID 747501-01) The MSE 1201 (ID 747501-01) power supply module has a power switch for turning
power on and off.
To power-off the system:
Press the Off (supply) side of the power switch to power-off the system.
MSE 1201
(ID 747501-02),
MSE 1202
(ID 747502-01) The MSE 1201 (ID 747501-02) and MSE 1202 (ID 747502-01) power supply modules do
not have a power switch for turning power on and off.
To power-off the system:
Turn power off for the system.
13.2 Disconnect power cords
Disconnect power
cords Disconnect the power cords attached to all power supply modules in the module chain.
MSE 1201
(ID 747501-01) To disconnect the MSE 1201 (ID 747501-01) power cord:
Verify that the power switch is in the off position.
Verify that the power cord is not plugged into the main power supply.
Remove the female end of the power cord from the power connector 4 on the front
of the module.