1 mounting a module – HEIDENHAIN MSE 1000 User Manual
Page 19
Mounting
Mounting a module
Operating Instructions
19
4.1
Mounting a module
CAUTION
A power supply module must always be to the left of any modules it is powering in
the module chain. Once the maximum power consumption rating of a power supply
module is reached, install another power supply module into the module chain.
Mount a module
To mount a module:
Verify all power switches are in the off position (if applicable) and power is removed
from all power supply modules in the module chain.
Align the bottom edge of the DIN rail with the bottom channel
33
of the module.
Gently apply upward pressure, depressing the DIN rail spring
32
and inserting the
DIN rail into the bottom channel
33
of the module.
While maintaining upward pressure, rotate the top of the module towards the DIN
rail until the top channel
31
of the module is aligned above the DIN rail.
Gently release the upward pressure, locking the module onto the DIN rail.