HEIDENHAIN MSE 1000 - Manual (Page 123)

Maintenance
Operating Instructions 123
11 Maintenance
WARNING
A risk of personal injury or death exists if regular inspection and maintenance tasks
are not completed.
Follow the recommended inspection and maintenance schedule to keep the product
in a safe operating condition.
The following inspection and maintenance procedures are required to ensure the
product is maintained in a safe operating state.
Type Part Interval Possible failure Follow up
Visual
inspection Power cord Annual Damaged insulation,
visible or damaged wires Replace power
cord
Visual
inspection Symbols and labels
on product Annual Labels and safety
symbols not readable
or not present on the
product. Refer to "Safety
symbols", page 15. Contact a
HEIDENHAIN
service
technician
Visual
inspection Product housing
and interface
connections Annual Damage or wear
that can affect the
functionality and safety
of the product Contact a
HEIDENHAIN
service
technician
Electrical
Test Protective ground
connection Annual Interrupted or bad
connection Replace power
cord or contact
a HEIDENHAIN
service
technician