HEIDENHAIN MSE 1000 - Manual (Page 77)

Commissioning and preparing to measure
Module setup
Operating Instructions 77
8.2 Module setup
The Module setup tab provides options to change the label used to identify a module
and the ability to activate or deactivate a module. Hardware, firmware and network
information specific to the selected module is also displayed.
The Setup screen for an LVDT module provides a button for accessing a calibration
screen. The LVDT calibration screen provides options for updating the excitation
voltages and for configuring the channel resolutions from a single location.
Module tab information:
Module label
Model
Module ID
Hardware ID
Bootloader version
Firmware version
Serial number
Using DHCP
IP address
IP address (static)
Netmask
Netmask (static)
MAC address
Active
Module setup tab