HEIDENHAIN MSE 1000 - Manual (Page 98)

Commissioning and preparing to measure
Mastering
98 Operating Instructions
Master
To open the Mastering screen:
Click the «Master» button.
The Mastering screen is displayed in the content area. A message verifying the
action is displayed in the message area.
Apply offsets To apply offsets:
Double-click inside an offset value field.
The current value is highlighted.
Enter the required offset value.
Repeat entering offset values for all channels that require an offset.
Click the «Apply all» button.
A message veryfying the action is displayed in the message area.
Unapply offsets To unapply offsets:
Click the «Unapply all» button.
A message veryfying the action is displayed in the message area.
Enable channel offset To enable a channel offset:
Select a channel from the Tree.
Click the «Enable offset» button.
Click the «Apply all» button.
The Enable offset button toggles to the Disable offset button. A message veryfying
the action is displayed in the message area.