HEIDENHAIN MSE 1000 - Manual (Page 81)

Commissioning and preparing to measure
Module setup
Operating Instructions 81
8.2.2 LVDT Teach resolutions
The LVDT Teach resolutions screen is used to convert the voltage value returned from
an LVDT sensor into millimeters or inches. The conversion is done by interpolating
the voltage based on the minimum and maximum physical position of the sensor. The
Teach resolutions screen configures all of the sensors connected to a single LVDT
module. LVDT sensors can be configured individually from the Setup screen channel
and device tabs. Teach resolutions only applies to a channel that has a sensor assigned
to it.
Teach resolutions information:
Min (mm) or Min (in)
Max (mm) or Max (in)
Sensor output (V)
Res. (mm/V) or Res. (in/V)
Calibration timestamp
LVDT Teach
resolutions screen