HEIDENHAIN MSE 1000 - Manual (Page 87)

Commissioning and preparing to measure
Channel setup
Operating Instructions 87
Select display
resolution The Display resolution setting is used to select the resolution value of the channel
when displayed in the Data and Master screens.
To select a display resolution:
Click the Display resolution drop-down arrow and select the desired value.
Click the «OK» button.
A message verifying the action is displayed in the message area.
Select Unit of
measurement The Unit of measurement setting is used to select the units that a channel will be
displayed in.
Unit of measurement options:
mm
in
deg
dms
rad
none
V
mA
°F
°C
mbar
kPa
psi
To select a unit of measurement:
Click the Unit of measurement drop-down arrow and select the desired value.
Click the «OK» button.
A message verifying the action is displayed in the message area.
Select channel angle
format The Angle format setting is used to select the format that angle measurements for
rotary encoders will be displayed in.
Angle format options:
360
180+/-
infinite +/-
360 +/-
To select an angle format:
Click the Angle format drop-down arrow and select the desired value.
Click the «OK» button.
A message verifying the action is displayed in the message area.