TA Triumph-Adler DC 2062 - Manual (Page 105)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
3 How to register the various timer settings
● Setting the time
1. Enter the weekly timer select mode. (See page 8-7.)
2. Touch the “TIMER SET” key.
3. Set the present time by touching the “+” key or the “-” key for the hour and minutes.
* Enter the time on the 24-hour basis (00:00 - 23:95).
4. Touch the “ENTER” key.
The touch panel will return to the weekly timer set-up screen.
5. Touch the “END” key.
The touch panel will return to the basic screen.
● Programming the weekly timer
1. Enter the weekly timer select mode. (See page 8-7.)
2. Touch the “WEEK TIMER” key.
3. Touch the day of the week that you want to set the ON and OFF times for.
3. Use the numeric keys to enter the management pin code “6200”.
If the pin code you entered matches the registered one, the screen will change to the
weekly timer set-up screen. See “
3 How to register the various timer settings” in order to
make the desired settings.
* You can change the 4-digit management pin code as desired. (See “
9 Management pin
code change” on page 8-11.)
8-8