TA Triumph-Adler DC 2062 - Manual (Page 129)

Section 9 OPTIONAL EQUIPMENT
2A080030A
KM-6230 (KME)
/ 131
(1) Finisher
The Finisher stores a large quantity of copies, and sorts multiple sets by shifting the
position that each one is ejected. It is also possible to use the Finisher to staple the copy
sets or punch holes in them for filing purposes.
1 1 1 1 1 Selecting the desired mode
• Sorting modes
Press the Sort-Group key until the indicator that corresponds to the mode that you want
to use is lit (Sort or Group).
The mode that is selected when both the Sort and Group indicators are out will differ
depending upon the setting made under “
7 Sort mode ON/OFF” on page 8-16.
• SORT:ON…The Sort mode will be selected and copies will be ejected into the Non-sort
tray.
• SORT:OFF…The Non-sort mode will be selected and copies will be ejected into the
Non-sort tray.
• Staple mode
Press the Staple Sort key to select the desired stapling style from among the three styles
available.
• Hole Punch mode
Press the Punch key to select the desired number of holes from among the two styles
available [either 2- or 4-hole punch].
* The Hole Punch mode may be used in combination with the Sort mode, the Staple-Sort
mode or the Group mode.
IMPORTANT!
• If copies come out curled or are stacked unevenly, turn the paper in the drawer over.
• When copying onto special paper such as Transparencies, make sure both the Sort
and Group indicators are out.
Section 9 OPTIONAL EQUIPMENT
9-1