TA Triumph-Adler DC 2062 - Manual (Page 110)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
3. Set the width of the custom paper size by touching the upper “+” or “-” key. The paper width
can be set between 162 mm and 242 mm in 1 mm increments.
4. Set the length of the custom paper size by touching the lower “+" or “-" key. The paper
length can be set between 98 mm and 162 mm in 1 mm increments.
5. Touch the “END" key.
The touch panel will return to the basic screen and copying will be possible.
* When the type of paper is set to “CUSTOM SIZE", “------" will be displayed on the stack
bypass key on the basic screen.
2 Automatic drawer switching ON/OFF
1. Select whether to use the automatic drawer switching function or not by touching the “ON”
key or the “OFF” key, as appropriate.
* If you want to continue changing other default settings, follow the procedure that corre-
sponds to that setting. Once you are finished, touch the “END” key and then the “BASIC”
key. The touch panel will return to the basic screen.
3 Drawer paper size
1. If you want to change the size of the drawer, touch the “CHANGE” key.
2. Touch the desired size of paper to be loaded to the drawer.
The touch panel will return to the machine default select screen.
* If you want to continue changing other default settings, follow the procedure that corre-
sponds to that setting. Once you are finished, touch the “END” key and then the “BASIC”
key. The touch panel will return to the basic screen.
4 Special paper designation
1. If you want to change the drawer that is designated for special paper, touch the “CHANGE”
key.
2. Touch the key that corresponds to the drawer which is loaded with special paper. An
asterisk (*) will appear in the paper size key for that drawer.
* To delete the asterisk from that key, simply touch the same key once again.
* You can add an asterisk to more than one drawer if you want.
3. Touch the “END” key.
The touch panel will return to the machine default select screen.
* If you want to continue changing other default settings, follow the procedure that corre-
sponds to that setting. Once you are finished, touch the “END” key and then the “BASIC”
key. The touch panel will return to the basic screen.
8-13