TA Triumph-Adler DC 2062 - Manual (Page 122)

Section 8 COPIER MANAGEMENT
2A080030A
KM-6230 (KME)
/ 131
2. Select the type of box for which you want to delete all of the data.
3. A message that checks to make sure that you want to delete the data will appear.
If you are certain that you want to delete the data, touch the “DELETE” key.
* You can continue to perform other box management procedures. Once you are finished,
touch the “END” key and then, in the next screen, touch the “BASIC” key. The touch
panel will return to the basic screen.
2 Box name & password / Clear data in box
1. Touch the “BOX NAME/BOX PASSWORD/CLEAR DATA IN BOX” key.
2. Select the number of the box (001 - 100) that you want to access by touching the “+” key
or the “-” key, as appropriate.
3. Touch the “END” key.
4. If you want to register a name for that box, touch the “BOX NAME” key.
5. Enter the name that you want to register for that box.
(See page 8-29 for the procedure on entering the name.)
* Once you are finished and have touched the “END” key, the touch panel will return to the
screen for step 4.
8-25