TA Triumph-Adler DC 2062 - Manual (Page 76)

Section 6 ADVANCED COPY MODES
6-10
2A080030A
KM-6230 (KME)
/ 131
4. Select how you want the copies to be finished by touching either the “2-SIDED COPY” or
“1-SIDED COPY” key.
* If you selected “SHEET & BOOK ORIGINALS” in step 3, go to the next step. If you
selected “BOOK ORIGINALS”, go to step 6. If you selected “SHEET ORIGINALS”, go to
step 7.
5. Specify the type of the originals that are being used by touching either the “SHEET ORIGI-
NAL” or “BOOK ORIGINAL” key.
* If you selected “SHEET ORIGINAL”, go to step 7. If you selected “BOOK ORIGINAl”, go
to next step.
6. Specify the binding orientation of the originals.
7. The start scanning screen will appear.
* The auto magnification selection mode is the default setting in the initial mode. When
copying onto custom paper sizes or with a custom zoom ratio, press the Manual key until
“1:1” appears on the copy magnification ratio display.
* If you want to change the magnification ratio, touch the “+” key or the “-” key at the right of
the copy magnification ratio display to select the desired ratio. If you want to change the
zoom mode, such as selecting the standard zoom or XY zoom mode, touch the “ZOOM”
key and follow the instructions from page 4-4.
* The setting of the zoom mode can be changed by each job.
6-9