TA Triumph-Adler DC 2062 - Manual (Page 154)

Section 10 TROUBLESHOOTING
2A080030A
KM-6230 (KME)
/ 131
1. Hold down the Finisher release button and pull the Finisher away from the copier.
2. Remove the misfed paper from the coupling section without tearing it.
3. If the misfed paper cannot be removed from the coupling section, open the upper
cover.
4. Remove the misfed paper from the conveyor section.
5. Close the upper cover and reattach the Finisher to the copier.
● Misfeed in the Sort tray
If “MISFEED IN FINISHER. REMOVE PAPER.” and the misfeed location indicator shown
in the illustration appear on the touch panel, paper has misfed in the conveyor section to
the Sort tray.
1. Lift up the Non-sort tray.
10-13