TA Triumph-Adler DC 2062 - Manual (Page 148)

Section 10 TROUBLESHOOTING
2A080030A
KM-6230 (KME)
/ 131
● Misfeed in the stack bypass tray
If “PAPER MISFEED IN STACK BYPASS. REMOVE PAPER.” and the misfeed location
indicator shown in the illustration appear on the touch panel, paper has misfed in the
stack bypass tray.
1. Remove all the paper remaining in the stack bypass tray.
* If the paper is difficult to remove, do not try to pull it out by force, but refer to
“ 2 Misfeed in the paper conveyor section” in order to remove the misfed paper.
2. Make sure that the misfeed message has disappeared from the touch panel.
Then re-set the paper into the stack bypass tray.
2 2 2 2 2 Misfeed in the paper conveyor section
If “PAPER MISFEED. OPEN FRONT COVER.” and the misfeed location indicator shown
in the illustration appear on the touch panel, paper has misfed in the paper conveyor
section.
1. Open the front cover.
2. Lower the paper conveyor section release lever to the left.
WARNING
High voltage is present in the charger section. Take sufficient care when
working in this area, as there is a danger of electrical shock.
3. Turn the paper feed section knob in the direction of the arrow to convey the misfed
paper to the conveyor section.
10-7