TA Triumph-Adler DC 2062 - Manual (Page 94)

Section 7 DOCUMENT MANAGEMENT FUNCTIONS
2A080030A
KM-6230 (KME)
/ 131
3. If you want to change the password for that synergy print box, touch the “PASSWORD”
key.
If you do not want to change the password, go to step 6.
4. Use the numeric keys to enter the new password. (Max. 8 digits)
5. Touch the “END” key. The touch panel will return to the basic screen.
6. If you want to change the name of a set of originals, select the corresponding originals and
touch the “RENAME” key.
If you do not want to change the name, go to step 8.
* If the name that you want to change is not displayed, touch the “
▼” key or the “▲” key
until it is displayed.
7. Enter the new name that you want to register for those originals.
(See page 8-9 for the procedure on entering the name.)
Once you are finished changing the name, the touch panel will return to the basic screen.
8. If you want to change the order in which the name of those originals are displayed, touch
the “ q UP” key or the “Q DOWN” key until that name is in the position that you want.
9. Touch the “END” key and then press the Reset key. The touch panel will return to the basic
screen.
7-16