Precautions for use, Precautions for use -3, Cautions when using the copier – TA Triumph-Adler DC 2062 User Manual

Page 12: Cautions when handling consumables

Advertising
background image

2A080030A

KM-6230 (KME)

/ 131

PRECAUTIONS FOR USE

Cautions when using the copier

WARNING
• DO NOT place metallic objects or containers with water

(flower vases, flower pots, cups, etc.) on or near the
copier. This type of situation presents a danger of fire
or electrical shock should they fall inside. ...................

• DO NOT remove any of the covers from the copier as

there is a danger of electrical shock from high voltage
parts inside the copier. ................................................

• DO NOT damage, break or attempt to repair the power

cord. DO NOT place heavy objects on the cord, pull it,
bend it unnecessarily or cause any other type of dam-
age.
These types of situations present a danger of fire or
electrical shock. ..........................................................

• NEVER attempt to repair or disassemble the copier or

its parts as there is a danger of fire, electrical shock or
damage to the laser. If the laser beam escapes, there
is a danger of it causing blindness. .............................

• If the copier becomes excessively hot, smoke appears

from the copier, there is an odd smell, or any other
abnormal situation occurs, there is a danger of fire or
electrical shock. Turn the main switch OFF (O)
immediately, remove the power plug from the outlet and
contact your service representative. ...........................

• If anything harmful (paper clips, water, other fluids, etc.)

falls into the copier, turn the main switch OFF (O)
immediately. Next, remove the power plug from the
outlet to avoid the danger of fire or electrical shock. Then
contact your service representative. ...........................

• DO NOT remove or connect the power plug with wet

hands, as there is a danger of electrical shock. ..........

• ALWAYS contact your service representative for

maintenance or repair of internal parts. ......................

CAUTION
• DO NOT pull the power cord when removing it from the

outlet. If the power cord is pulled, the wires may become
broken and there is a danger of fire or electrical shock.
(ALWAYS grasp the power plug when removing the
power cord from the outlet.) ........................................

• ALWAYS remove the power plug from the outlet when

moving the copier. If the power cord is damaged, there
is a danger of fire or electrical shock. .........................

• If the copier will not be used for a short period of time

(overnight, etc.), turn the main switch OFF (O).
If it will not be used for an extended period of time
(vacations, etc.), remove the power plug from the outlet
for safety purposes during the time the copier is not in
use. .............................................................................

• ALWAYS hold the designated parts only when lifting or

moving the copier. .......................................................

• For safety purposes, ALWAYS remove the power plug

from the outlet when performing cleaning operations. ..

• If dust accumulates within the copier, there is a danger

of fire or other trouble. It is therefore recommended that
you consult with your service representative in regard
to cleaning of internal parts. This is particularly effective
if accomplished prior to seasons of high humidity.
Consult with your service representative in regard to
the cost of cleaning the internal parts of the copier. ...

• DO NOT leave the document feeder open as there is a

danger of personal injury. ...........................................

Other precautions
• DO NOT place heavy objects on the copier or cause

other damage to the copier.

• DO NOT open the front cover, turn off the main switch,

or pull out the power plug during copying.

• During copying, some ozone is released, but the amount

does not cause any ill effect to one's health. If, however,
the copier is used over a long period of time in a poorly
ventilated room or when making an extremely large
number of copies, the smell may become unpleasant.
To maintain the appropriate environment for copy work,
it is suggested that the room be properly ventilated.

• When lifting or moving the copier, contact your service

representative.

• Do not touch electrical parts, such as connectors or

printed circuit boards. They could be damaged by static
electricity.

• DO NOT attempt to perform any operations not

explained in this handbook.

• CAUTION : Use of controls or adjustments or

performance of procedures other than those specified
herein may result in hazardous radiation exposure.

Cautions when handling

consumables

CAUTION
• Avoid inhalation, ingestion, skin or eye contact. If

ingestion occurs, dilute stomach contents thoroughly
with water and seek medical treatment. If skin contact
occurs, wash with soap and water. If contact with eyes
occurs, flush thoroughly with water and seek medical
treatment. ....................................................................

• Prolonged inhalation of excessive dusts may cause lung

damage. Use of this product, as intended, does not result
in inhalation of excessive dusts. .................................

• Keep away from children. ...........................................

• Do not incinerate toner and toner containers. Dangerous

sparks may cause burn. ..............................................

Other precautions
• Always read the safety instructions which are included

in the box or printed on the container when handling
consumables.

• Dispose of the toner or toner containers in accordance

with Federal, State and Local rules and regulations.

• Store consumables in a cool, dark location.

• If the copier will not be used for an extended period of

time, remove the paper from the cassette, return it to its
original package and reseal it.

1-3

Advertising