I-fax default settings, I-fax default settings -6 – Kyocera FAX System 12 User Manual

Page 216

Advertising
background image

10-6

Internet Faxing (i-FAX) > i-FAX Settings

i-FAX Default Settings

Function Settings > FAX / i-FAX

Use this page to enable the internet faxing.

The settings available on the page are shown below.

Item

Description

Common
Settings

Transmission

Local FAX Name

Enter the local fax name.

TTI

Selects On or Off whether to send the TTI (Transmit
Terminal Identifier) information to the other party.

TTI Position

Selects the position of the TTI to be printed on the
transmitted documents.

Account as Local FAX
Name

Set to On to use the account name as the local FAX
name. The account name appears in place of the
local FAX name.

Retry Times

Specify the number of redials.

Reception

Media Type

Sets the media type for printing the received
documents.

Use MP Tray

Selects whether or not to include the MP (multi
purpose) tray for auto media selection when printing
received documents. When turned [On], the MP tray
will be included as an option for auto media
selection, and when turned [Off], only the cassettes
will be selected.

Reduced RX Size

When the reception size is larger than the paper size,
you can reduce the print size.

Receive Date/Time

Selects [On] or [Off] whether to print the reception
information such as the received date, the received
time, the transmitting party's information and the
number of transmitted pages on the top of the
received documents.

Duplex Printing

Specifies whether or not to use the Duplex mode.

2in1 Printing

Enables or disables 2 in1 reception.

FAX Settings

Configure settings for FAX.

Command Center RX User Guide

Advertising