Kyocera FAX System 12 - Manual (Page 231)

11-8
Troubleshooting > Error Code List
E04200
U04200 Encrypted transmission was canceled because the specified box is not registered.
E04300
U04300 Encrypted transmission was canceled because the recipient fax is not equipped with an
encrypted communication function.
E04400
U04400 Encrypted transmission was canceled because the encryption key does not match.
E04500
U04500 Encrypted reception was canceled because the encryption key does not match.
E05100
U05100 Transmission was canceled because communication requirements are not met due to the
transmission restriction set on this machine. Check with the recipient.
E05200
U05200 Reception was canceled because communication requirements are not met due to the
reception restriction set on this machine.
E05300
U05300 Reception was rejected by the recipient because communication requirements are not met
due to the reception restriction set on the recipient machine. Check with the recipient.
E14000
U14000 Reception to the Sub Address Box was stopped because there is no more free space in the
memory of this machine. Create free space by outputting the data stored in the memory, or
cancel the reception to the Sub Address Box.
E14100
U14100 Transmission to the Sub Address Box or sub address box on our-brand recipient machine
was stopped because there is no more free space in the memory of the recipient machine.
Check with the recipient.
E19000
U19000 Memory reception was stopped because there is no more free space in the memory of this
machine. Create free space by outputting the data stored in the memory, and ask the sender
to resend.
E19100
U19100 Transmission was stopped because there is no more free space in the memory of the
recipient machine. Check with the recipient.
E19300
U19300 Transmission was stopped due to a data error occurring during transmission. Send again.
1101 Failed to send i-FAX.
Check the host name of the SMTP server on the Command Center RX.
1102 Failed to send i-FAX.
Check the following on the Command Center RX.
• SMTP login user name and login password
• POP3 login user name and login password
1104 Failed to send i-FAX.
Check the i-FAX address.
NOTE
If the address is rejected by the domain, you cannot send the E-mail.
1105 Failed to send i-FAX.
Select [On] of the i-FAX settings on the Command Center RX.
1106 Failed to send i-FAX.
Check the sender address of SMTP on the Command Center RX.
Error Code Possible Cause/Action