Kyocera FAX System 12 - Manual (Page 227)

11-4
Troubleshooting > Messages
Messages
When an error occurs, the display may show one of the messages listed below. These will help you identify and correct
the problem.
NOTE
When a transmission error occurs, a sent/receipt result report is produced.
Check the error code shown in the report and refer to the following:
Error Code List (page 11-6)
To print the sent/receipt result report, refer to the following:
Send Result Reports (page 7-7)
FAX RX Result Reports (page 7-9)
You may also check error codes using the activity report.
Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-10)