Kyocera FAX System 12 - Manual (Page 219)

10-9
Internet Faxing (i-FAX) > i-FAX Settings
*1 When Direct SMTP is used, this must always be set.
*2 When Internet FAX is used, this must always be set.
After completing the settings, click [Submit] to save the settings.
i-FAX Settings Transmission Transmission Type Allows to choose a method of sending from [Specify
for Each Destination], [Via server - On], and [Via
server - Off (Direct SMTP)].
Direct SMTP Sender
Address
*1
Displays the sender address used for E-mails sent
by Direct SMTP from this machine.
Direct SMTP Port
Number Enter the port number used by Direct SMTP.
Normally, 25 is used.
Direct SMTP Timeout Sets the timeout time in seconds during which this
device retries to connect to the SMTP server.
Reception Direct SMTP Port
Number Enter the port number used by Direct SMTP.
Normally, 25 is used.
Direct SMTP Timeout Sets the timeout time in seconds during which this
device retries to connect to the SMTP server.
E-mail Send
Settings E-mail Size Limit Enter the maximum size of E-mail that can be sent in
Kilobytes. When the value is 0, the limitation for E-
mail size is disabled.
Sender Address
*2
Displays the sender address used for E-mails sent
from this machine. Set in [E-mail Address] in POP3
User Settings
.
Signature Displays the signature to be inserted in the end of the
E-mail body. Set on the [E-mail Settings] page.
Function Default The default settings can be changed in [Common/
Job Default Settings] page.
Item Description