Kyocera FAX System 12 - Manual (Page 28)

2-12
Before Using the Fax Machine > Quick Setup Wizard
Power Off setup items
Fax and Power Off setup procedure
1
Display the screen.
[System Menu/Counter] key > [Quick Setup Wizard] > "FAX Setup" [Next]
2
Configure the function.
Start the wizard. Follow the instructions on the screen to configure settings.
*1 Inch version only.
*2 This is displayed when the option of two fax kits has been installed.
*3 DRD reception mode is available for some countries.
*4 This setting does not appear in some regions.
*5 This function is displayed when the optional Job Separator, Mailbox or 4,000-Sheet Finisher is installed. When an
Inner Finisher or a 1,000-Sheet Finisher is installed with the machine, this function is not displayed.
NOTE
The settings can be changed in the system menu.
Default fax settings (page 8-2)
Step Setting item Description
Reference
Page
Power Off Setup Show Power Off
Message Set the mode whether display a confirmation message
in power supply off. 8-7
NOTE
The settings can be changed in the system menu.
Default fax settings (page 8-2)
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
TASKalfa 2552ci 2500 2500
TASKalfa 3252ci 3200 3200
TASKalfa 4002i/
TASKalfa 4052ci 4000 4000
TASKalfa 5002i/
TASKalfa 5052ci 5000 5000
TASKalfa 6002i/
TASKalfa 6052ci 6000 6000