Media type for print output, Media type for print output -6 – Kyocera FAX System 12 User Manual
Page 86
4-6
Receiving Faxes > Media Type for Print Output
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
For more information about configuring settings, refer to the following:
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1
Display the screen.
[System Menu/Counter] key > [Cassette/MP Tray Settings] > "Cassette1-5" or "MP Tray
Setting" [Next]
Select the cassette that you want to use for fax reception.
2
Selecting the paper size.
1
Select "Paper Size" [Change].
2
Inch models: [Auto] > [Inch]
Metric models: [Auto] > [Metric]
3
Select [OK].
3
Selecting the paper type.
1
Select "Media Type" [Change].
2
Select the paper type.
3
Select [OK].
4
Set the paper type.
Configure paper settings for fax reception. When selecting the paper type, select the same
paper type as you selected in step 3.
For more information about configuring settings, refer to the following:
Supported paper types
All Media Types, Plain, Rough, Vellum, Labels, Recycled, Bond,
Cardstock, Color, Envelope, Thick, Coated, High Quality, Custom
1-8
IMPORTANT
Specify the settings as follows for the cassette that you want to use for fax reception.
Inch models: [Auto] > [Inch]
Metric models: [Auto] > [Metric]