Kyocera FAX System 12 - Manual (Page 230)

11-7
Troubleshooting > Error Code List
E01600 Communication error occurred during reception of high-speed transmission. Ask the sender
to reduce the transmission speed and send again.
NOTE
If the communication error occurs frequently, change the default setting of RX Start Speed in System
Menu.
E01700 - E01720 Communication error occurred during high-speed transmission. Send again.
If you still have trouble, reduce TX Start Speed and send again.
NOTE
If the communication error occurs frequently, change the default setting of TX Start Speed in System
Menu.
E01721 Communication error occurred during high-speed transmission. Designated transmission
speed may not be available for the recipient machine.
Reduce the transmission start speed and send again.
E01800 -E01820 Communication error occurred during reception of high-speed transmission. Ask the sender
to reduce the transmission speed and send again or reduce the RX Start Speed in System
Menu.
E01821 Communication error occurred during reception of high-speed transmission. Designated
transmission speed may not be available for this machine. Ask the sender to reduce the
transmission speed and send again or reduce the RX Start Speed in System Menu.
E03000
U03000 During polling reception, a fax could not be received because no originals were set in the
other party’s fax machine. Check with the other party.
E03200
U03200 Sub address bulletin board reception was attempted and the other party’s machine is an our
brand model, but the specified sub address box contained no data. Check with the other
party.
E03300
U03300 An error occurred due to either 1 or 2 below.
Check with the other party.
1 The other party’s machine is an our-brand model and transmission restrictions were
found set by the other party during polling reception. Communication was interrupted
because the password was incorrect.
2 The other party’s machine is an our-brand model and transmission restrictions were
found set by the other party during sub address bulletin board reception.
Communication was interrupted because the password was incorrect.
E03400
U03400 Polling reception was interrupted because the password entered by the other party did not
match the Local FAX ID on the receiving machine. Check with the other party.
E03500
U03500 Sub address bulletin board reception was attempted and the other party’s machine is an our
brand model, but the specified sub address box was not registered on the other party’s
machine.
Check with the recipient.
E03600
U03600 The other party’s machine is an our-brand model and sub address bulletin board reception
was interrupted because the specified sub address password was incorrect. Check with the
other party.
E03700
U03700 Sub address bulletin board reception was attempted but the other party’s machine either
does not have a sub address bulletin board communication function or there were no
originals in any of the originals transfer boxes (sub address boxes).
E04000
U04000 Specified sub address box is not registered in our brand recipient machine, or the sub
address does not match.
E04100
U04100 Recipient machine is not equipped with a sub address box function, or the sub address
does not match.
Error Code Possible Cause/Action