Kyocera FAX System 12 - Manual (Page 217)

10-7
Internet Faxing (i-FAX) > i-FAX Settings
i-FAX Settings TX/RX i-FAX Protocol *1, *2 Display whether an i-FAX connection is available or
not. Configure i-FAX in [i-FAX (SMTP & POP3)] on
the Protocol Settings page.
SMTP SMTP Server Name *2 Enter the SMTP server name or SMTP server IP
address. You can enter up to 64 characters.
If you enter the server name, you must specify the IP
address of the DNS server. You can enter the DNS
server IP address in the TCP/IP settings screen.
Machine’s Operation Guide
SMTP Port Number Set the port number used by SMTP. Normally, 25 is
used.
SMTP Server Timeout Enter the timeout period in seconds.
Authentication Protocol Specify whether SMTP authentication will be used or
whether [POP before SMTP] will be used.
POP before SMTP
Timeout If you selected [POP before SMTP] in the
authentication setting, specify the timeout period in
seconds.
Connection Test Tests to confirm that the settings on this page are
correct. When the [Test] button is clicked, this
machine tries to connect to the SMTP server.
Domain Restriction Activate or deactivate to restrict domains. Click the
[Domain List] button to configure. Enter a domain
name that is permitted or rejected. You can also
specify the E-mail addresses.
*1 When Direct SMTP is used, this must always be set.
*2 When Internet FAX is used, this must always be set.
Item Description