ProSoft Technology PLX8X-MNET-61850 - Manual (Page 123)

PLX8x-MNET-61850 ♦ Communication Gateway Diagnostics and Troubleshooting
Modbus TCP/IP to IEC 61850 User Manual
ProSoft Technology, Inc. Page 123 of 228
May 14, 2014
 T
ECHNICAL S UPPORT
: Click here to be directed to ProSoft’s Technical Support
website.
 H
OMEPAGE : Click here to go to the ProSoft gateway ’s homepage (shown
above).
 R
ESOURCES / P RO S OFT T ECHNOLOGY : Click here to be directed to ProSoft
Technology’s Web site.
 R
ESOURCES / M ODBUS O RGANIZATION : Click here to be directed to the
Modbus Organization’s Web site.
The following information is shown on the Home Page of the Gateway Web
page:
 D
EVICE N AME : This is the Project Name as set by the user in ProSoft 61850
Configuration Manager, in the ProSoft Gateway Configuration window.
 E
THERNET A DDRESS (MAC) : This is the gateway’s MAC address.
 IP A DDRESS
: This is the gateway’s IP Address.
 P
RODUCT R EVISION : This is the product revision number. This is determined
by the version# of the firmware that currently resides in the gateway.
 S
ERIAL N UMBER
: This is the gateway’s serial number.
 U
PTIME : This is the number of hours, minutes, and seconds that the gateway
has been "up" or alive since the last reboot or reconnection of power.
 C
URRENT T IME
: This is the gateway’s current time. You can change the
gateway’s time by use of SNTP, or choosing Functions / Set Date & Time.
 E
RROR LED: ON or OFF. This is the "ERR" LED above the power connector.
 C
ONFIG LED: ON or OFF. This is the "CFG" LED above the power
connector.
 F
AULT LED: OK or ON. This is the "FLT" LED above the power connector.