ProSoft Technology PLX8X-MNET-61850 - Manual (Page 134)

Diagnostics and Troubleshooting PLX8x-MNET-61850 ♦ Communication Gateway
User Manual Modbus TCP/IP to IEC 61850
Page 134 of 228 ProSoft Technology, Inc.
May 14, 2014
5.7.6 InterProcess Communication (IPC) Events
"IPC_ACCEPTED_SOCKET", "Accepted new connection from Client %s on
socket %d."};
"IPC_BAD_MESSAGE_HEADER", "Start of IPC message header was not equal
to {0}. Socket will be closed."};
"IPC_CONNECTION_SUCCESSFUL", "Successfully connected to {0}."};
"IPC_ERROR_BINDING_SOCKET", "Error binding network socket. Port number
= {0}."};
"eIPC_ERROR_CLOSING_SOCKET", "Error closing network socket."};
"IPC_ERROR_CONNECTING_TO_SOCKET", "Error connecting to network
socket at {0} port {1}."};
"IPC_ERROR_CREATING_SOCKET", "Error creating network socket."};
"IPC_ERROR_GETTING_SOCKET_NAME", "Error getting socket name."};
"IPC_ERROR_READING_MESSAGE_FORMAT", "Error reading message
format from IPC message header. Expected to read {0} bytes, but only read {1}
bytes."};
"IPC_ERROR_READING_MESSAGE_LENGTH", "Error reading message length
from IPC message header. Expected to read {0} bytes, but only read {1} bytes."};
"IPC_ERROR_SENDING_DATA", "Error sending data to remote system."};
"IPC_ERROR_SENDING_MESSAGE", "Error sending message to remote
system."};
"IPC_ERROR_SETTING_SOCKET_OPTION", "Error setting socket option."};
"IPC_INVALID_MESSAGE_FORMAT", "Invalid message format found in IPC
message header. Invalid message format value = {0}."};
"IPC_LISTEN_ERROR", "Error listening on network socket."};
"IPC_MESSAGE_LENGTH_MISMATCH", "Error reading IPC message.
Message length did not match number of bytes read. Message length = {0}.
Number bytes read = {1}."};
"IPC_RECEIVE_BUFFER_TOO_SMALL", "Unable to receive IPC message
because message length is larger than receive buffer. IPC message length = {0}.
Receive buffer size = {1}."};
"IPC_REMOTE_CLIENT_DISCONNECTED", "Closing socket because remote
Client disconnected."};
"IPC_SOCKET_ACCEPT_ERROR", "Error accepting new network socket
connection."};
"IPC_SOCKET_ERROR", "Socket error occurred. Closing socket."};
"IPC_SOCKET_SELECT_ERROR", "Error returned from socket select()."};