ProSoft Technology PLX8X-MNET-61850 User Manual
Page 84
Advertising
Example Configurations
PLX8x-MNET-61850 ♦ Communication Gateway
User Manual
Modbus TCP/IP to IEC 61850
Page 84 of 228
ProSoft Technology, Inc.
May 14, 2014
3.5.1 Validate Configuration Button
After the download is successfully completed successful, the validity of the
configuration will need to be checked by verifying communication from the IED to
the PLC and, possibly, from the PLC to the IED. The validation button is used to
validate that the IED’s are on the same network as the IEC 61850.
If the IED is not on the same network as the IEC 61850 then the
following error message will appear and prevent validation.
Advertising