ProSoft Technology PLX8X-MNET-61850 - Manual (Page 23)

PLX8x-MNET-61850 ♦ Communication Gateway ProSoft 61850 Configuration Manager
Modbus TCP/IP to IEC 61850 User Manual
ProSoft Technology, Inc. Page 23 of 228
May 14, 2014
2 ProSoft 61850 Configuration Manager
In This Chapter
 ProSoft 61850 Configuration Manager Main Screen ............................. 24
 ProSoft Gateway Configuration ............................................................. 31
 IEC 61850 ............................................................................................. 37
 Modbus TCP/IP Configuration ............................................................... 46
To configure the ProSoft gateway, these steps will need to be followed in this
order:
1. Configure the gateway by setting the properties for the ProSoft Gateway
icon.
2. Configure the IEDs that will communicate with the gateway.
3. Configure the Modbus devices that will communicate with the gateway.
The reason the IEDs are configured before the Modbus devices is because
ProSoft 61850 Configuration Manager takes steps to assist with the Modbus
configuration after the IEDs are setup.