ProSoft Technology PLX8X-MNET-61850 - Manual (Page 54)

ProSoft 61850 Configuration Manager PLX8x-MNET-61850 ♦ Communication Gateway
User Manual Modbus TCP/IP to IEC 61850
Page 54 of 228 ProSoft Technology, Inc.
May 14, 2014
Retry Count This parameter specifies the number of times a failed command will be
retried before being skipped and sending the next command in the
Command List. Valid values range from 0 to 10. The default value is 0.
Command Error Delay This parameter specifies the number of 100 millisecond intervals to
suspend execution of a command in the Command List after it fails. If
this parameter is set to 0, there will be no delay. Valid values range
from 0 to 300. The default value is 300.