GeoVision GV-AS2120 IP Control Panel - Manual (Page 140)

138
2. Type the default value
admin
for both User name and Password, and click
OK
. This
page appears.
Figure 7-3
3. In the
DHCP Client
section, click
Disable
. Type the static IP address information,
including IP Address, Subnet Mask, Default Gateway and Domain Name Server.
4. Click
Submit
. When the setting is complete, the Status field will indicate
Register
Success
. Then GV-AS / GV-EV Controller can be accessed with this fixed IP address.
Note:
If you like to use the domain name instead of IP address, you may use Domain
Name Service as well. For details on domain name service, see
7.2 DHCP Connection
.