GeoVision GV-AS2120 IP Control Panel - Manual (Page 85)

GV-AS120 Controller
83
3
3.3.1.A Adding a Card
Up to 1,000 cards can be enrolled on GV-AS120 directly without needing additional software.
When working with GV-ASManager software, GV-AS120 can support up to 40,000 cards.
1. Present the Enroll Card.
2. Present the card you want to add to the GV-AS120.
3. The GV-AS120 will produce a long beep if the card has been added successfully and
three short beeps if the adding procedure has failed.
The default password will be 1234 and the card will automatically be set to a Normal Card.
You can change the password and set the card to different card types such as Patrol Card
or Two-person A/B Card using GV-ASManager. Refer to the
Adding Cards
section in
GV-
ASManager User’s Manual for more details.
Note:
GV-AS120 does not support cards set up as Security Cards.
3.3.1.B Deleting a Card
1. Present the Delete Card.
2. Present the card you want to delete.
3. The GV-AS120 will produce a long beep if the card has been deleted successfully and
three short beeps if the deleting procedure has failed.