GeoVision GV-AS2120 IP Control Panel - Manual (Page 158)

156
8.2.2 Parameter Configuration
In the left menu, click
Parameter Configuration
for GV-AS Controllers or click
Elevator
Parameter
for GV-EV48.
8.2.2.A GV-AS1010 / 1110 / 210 / 2110 / 2120 / 410 / 4110 / 810 / 8110
The contents of the Parameter Configuration page change based on your settings for
Door/Gate #
in the
Function Configuration
page (Figure 8-8). The number of door/gate
settings available varies among different models.
IMPORTANT:
Once connected to GV-AS / GV-EV Controller, GV-ASManager will load its
parameters to the controller. That means some of the Parameter Settings you have
configured here may be overwritten by GV-ASManager later.