GeoVision GV-AS2120 IP Control Panel - Manual (Page 58)

56
2.2.1 Connecting Card Readers
2.2.1.A Wiegand Readers (GV-AS110 Only)
GV-AS110 provides one Wiegand input for connection to the Wiegand reader ranging from
26 to 64 bits. Through the GV-AS110 keypad, you can set the Wiegand reader as the entry
or exit reader. To define the reader, see the
Door/Gate Function
option in
2.3.2
Programming the GV-AS110 / 1110
.
Note:
Wiegand connection is not supported for GV-AS1110.
The table below shows the wire assignments of the Wiegand input on GV-AS110. Please
consult the documentation of your Wiegand reader for wiring. You will need to set up a
separate power source to power the Wiegand reader.
2.2.1.B Network Readers (GV-AS1110 Only)
GV-AS1110 supports network port for network connection with GV-CR420 and GV-GF1921 /
1922. Through the GV-AS1110 keypad, you can set the network reader as the entry or exit
reader. To define the reader, see the
Door/Gate Function
option in
2.3.2 Programming the
GV-AS110 / 1110
.
Note:
1. Network connection with reader is not supported for GV-AS110.
2. GV-AS1110 does not support network connection with GV-GF1911 / 1912.
GV-AS1110
Network
Reader
TCP/IP
Figure 2-7
Wire color Definition
Green Wiegand Data 0
White Wiegand Date 1