GeoVision GV-AS2120 IP Control Panel - Manual (Page 194)

192
9.1.4.G Other Settings
The figure below shows the location of the
Web Setting Switch
,
Reset Button
and
Default
Button
.
Default
ON OFF
Web
Setting
Reset EN
Figure 9-8
9.1.4.G.a Web Setting Switch
When the
Web Setting
switch is set to ON, you can modify
Advanced Settings
of GV-
AS100, GV-AS110 and GV-AS120 through the Web interface. When the switch is set to
OFF, Advanced Settings are not accessible. For details on Advanced Settings, see
9.3.2
Advanced Settings
.
9.1.4.G.b Resetting the GV-ASBox
To reset GV-ASBox, press the
Reset EN
button on GV-ASBox for 3 seconds.
9.1.4.G.c Restoring Factory Defaults
To restore factory default values, press the Default button on GV-ASBox for 3 seconds. After
this it may take up to 3 minutes to restore GV-ASBox to default values.