GeoVision GV-AS2120 IP Control Panel - Manual (Page 206)

204
9.3.2.B Parameter Setting
In the left menu, click
Parameter Setting
. This
AS100/AS110/AS120 Configuration
page
appears. The contents of Parameter Setting change based on your settings for Door/Gate A
and Door/Gate B in the
Function Setting
page (Figure 9-15).
Figure 9-16
Note:
The Door B settings and Input Name settings are only available when connecting
through GV-ASBox.
IMPORTANT:
Once connecting to GV-AS100 / 110 / 120, GV-ASManager will load its
parameters to the GV-AS Controller. That means some of the Parameter Settings you have
configured here may be rewritten by GV-ASManager later.