HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer User Manual
Page 135
2.
On the Email Setup dialog, select the Enable Send to Email check box. If this check box is not selected, the
feature is unavailable at the printer control panel.
3.
In the Outgoing Email Servers (SMTP) area, complete the steps for one of the following options:
●
Select one of the displayed servers.
●
Click Add to start the SMTP wizard.
1.
In the SMTP wizard, select one of the following options:
○
Option one: If you know the SMTP server address or host name, enter the information, and
then click Next.
○
Option two: If you do not know the address of the SMTP server, select Search network for
outgoing email server, and then click Next. Select the server, and then click Next.
NOTE:
If an SMTP server was already created for another printer function, the Use a server
already in use by another function option displays. Select this option, and then configure it to be
used for the email function.
2.
On the Set the basic information necessary to connect to the server dialog, set the options to
use, and then click Next.
ENWW
Set up Scan to Email 121