HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer - Manual (Page 201)

Table 8-10 HP Embedded Web Server Networking tab > Configuration settings (continued)
Menu Description
AirPrint Enable, set up, or disable network printing from Apple-supported printers.
Select Language Change the language displayed by the HP Embedded Web Server. This page displays if the
web pages support multiple languages. Optionally, select supported languages through
language-preference settings in the browser.
Select Location Select a country/region for the printer.
Table 8-11 HP Embedded Web Server Networking tab > Google Cloud Print settings
Menu Description
Setup Set up Google Cloud Print options.
Web Proxy Configure proxy settings.
Table 8-12 HP Embedded Web Server Networking tab > Security settings
Menu Description
Settings View and restore current security settings to factory-default values.
Configure security settings using the Security Configuration Wizard.
NOTE: Do not use the Security Configuration Wizard to configure security settings using
network-management applications, such as HP Web Jetadmin.
Authorization Control configuration management and use of this printer, including the following:
● Set or change the administrator password to control access to configuration
parameters.
● Request, install, and manage digital certificates on the HP Jetdirect print server.
● Limit host access to this printer through an Access Control List (ACL) (for selected print
servers on IPv4 networks only).
Secure Communication Configure security settings.
Mgmt. Protocols Configure and manage security protocols for this printer, including the following:
● Set the security management level for the HP Embedded Web Server, and control
traffic over HTTP and HTTPS.
● Configure the SNMP (Simple Network Management Protocol) operation. Enable or
disable the SNMP v1/v2c or SNMP v3 agents on the print server.
● Control access through protocols that may not be secure, such as printing protocols,
print services, discovery protocols, name resolution services, and configuration-
management protocols.
802.1X Authentication Configure 802.1X authentication settings on the Jetdirect print server as required for client
authentication on the network, and reset the 802.1X authentication settings to factory-
default values.
CAUTION: When changing the 802.1X authentication settings; the printer might lose its
connection. To reconnect, it might be necessary to reset the print server to a factory-
default state and reinstall the printer.
ENWW Advanced configuration with the HP Embedded Web Server (EWS) 187