Energy-conservation settings, Set the sleep schedule – HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer User Manual
Page 210
Energy-conservation settings
Learn about the energy-conservation settings that are available for the printer.
●
Set the sleep timer and configure the printer to use 1 watt or less of power
●
●
Set the sleep timer and configure the printer to use 1 watt or less of power
The sleep settings affect how much power the printer uses, the wake/sleep time, how quickly the printer enters
sleep mode, and how quickly the printer wakes up from sleep mode.
To configure the printer to use 1 watt or less of power while in sleep mode, enter times for both the
Sleep after
Inactivity
and
Auto Off after sleep
settings.
NOTE:
HP does not recommend using deep sleep settings if you have Security Solutions installed. In some
situations, the printer does not wake from deep sleep. For additional information, contact your HP
representative.
1.
From the Home screen on the printer control panel, navigate to the
Settings
application, and then select
the
Settings
icon.
2.
Open the following menus:
a.
General
b.
Energy Settings
c.
Sleep Settings
3.
Select
Sleep after Inactivity
to specify the number of minutes the printer is inactive before it enters sleep
mode. Enter the appropriate time period.
4.
Select
Auto Off after sleep
to put the printer into a deeper power save mode after a period of sleep. Enter
the appropriate time period.
NOTE:
By default, the printer will wake from Auto Off in response to any activity other than USB or Wi-Fi.
For greater energy settings, you can set it to wake only to the power button by selecting
Shut down (wake
on power button only)
.
5.
Select
Done
to save the settings.
Set the sleep schedule
Use the
Sleep Schedule
feature to configure the printer to automatically wake or go into Sleep mode at specific
times on specific days of the week.
1.
From the Home screen on the printer control panel, navigate to the
Settings
application, and then select
the
Settings
icon.
2.
Open the following menus:
196 Chapter 8 Manage the printer
ENWW