HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer - Manual (Page 272)

13. Paper could be jammed inside the fuser where it
would not be visible. Grasp the fuser handles,
squeeze the release levers, lift up slightly, and then
pull straight out to remove the fuser.
CAUTION: The fuser can be hot while the
printer is in use. Wait for the fuser to cool before
handling it.
14. Open the jam-access door on the fuser. If paper is
jammed inside the fuser, gently pull it straight up
to remove it. If the paper tears, remove all paper
fragments.
CAUTION: Even if the body of the fuser
has cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers.
15. If paper is jammed as it enters the output bin,
gently pull the paper out to remove it.
258 Chapter 9 Solve problems ENWW