HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer User Manual
Page 221
5.
Verify that the humidity in the room is within specifications for this printer and that paper is being stored in
unopened packages. Most reams of paper are sold in moisture-proof wrapping to keep paper dry.
In high-humidity environments, paper at the top of the stack in the tray can absorb moisture, and it might
have a wavy or uneven appearance. If this happens, remove the top 5 to 10 sheets of paper from the stack.
In low-humidity environments, excess static electricity can cause sheets of paper to stick together. If this
happens, remove the paper from the tray, and flex the stack by holding it at each end and bringing the ends
up to form a U shape. Then, rotate the ends down to reverse the U shape. Next, hold each side of the stack
of paper and repeat this process. This process releases individual sheets without introducing static
electricity. Straighten the paper stack against a table before returning it to the tray.
Figure 9-3
Technique for flexing the paper stack
1
2
1
2
A4
A3
6.
Check the printer control panel to see if it is displaying a prompt to feed the paper manually. Load paper,
and continue.
ENWW
Printer does not pick up paper or misfeeds 207