HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer - Manual (Page 187)

Table 7-2 Fax send settings (continued)
Menu item Description
Error Correction Mode Normally, the fax accessory monitors the signals on the telephone line while it is
sending or receiving a fax. If the fax accessory detects an error during the transmission
and the Error Correction Mode setting is on, the fax accessory can request that the
error portion of the fax be sent again.
The Error Correction Mode feature is enabled by default. You should turn it off only if
you are having trouble sending or receiving a fax and if you are willing to accept the
errors in the transmission and a probable quality reduction in the image. Turning off
the setting might be useful when you are trying to send a fax overseas or receive one
from overseas, or if you are using a satellite telephone connection.
NOTE: Some VoIP providers might suggest turning off the Error Correction Mode
setting. However, this is not usually necessary.
Fax Header Use the Fax Header feature to control whether the header is appended to the top, and
content is shifted down, or if the header is overlaid on top of the previous header.
Fax receive settings
Use the following steps to change the fax receive settings.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
a. Fax
b. Fax Receive Settings
c. Fax Receive Setup
3. Configure any of the following settings, and then select Done .
Table 7-3 Fax receive settings
Menu item Description
Receive Mode The Receive Mode setting determines how the fax accessory receives fax jobs. Select
one of the following options:
● Automatic
● TAM
● Fax/Tel
● Manual
Rings to Answer The Rings to Answer setting determines the number of times the phone rings before
the call is answered by the fax accessory.
NOTE: The default range for the available options for the Rings to Answer setting is
location-specific. The range of possible Rings to Answer options is limited by location.
If the fax accessory is not answering, and the Rings to Answer setting is 1, try
increasing it to 2.
Ring Volume The Ring Volume setting allows you to adjust the ringer volume.
ENWW Change fax configurations 173