HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer - Manual (Page 185)

Change fax configurations
Change or update fax settings.
● Fax dialing settings
● General fax send settings
● Fax receive settings
NOTE: The settings configured using the control panel override any settings made in the HP Embedded Web
Server.
Fax dialing settings
Use the following steps to change the fax dialing settings.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
a. Fax
b. Fax Send Settings
c. Fax Dialing Settings
3. Configure any of the following settings, and then select Done .
Table 7-1 Fax dialing settings
Menu item Description
Redial on Error The Redial on Error feature sets the number of times a fax number will be redialed
when an error occurs during a fax transmission.
Redial on No Answer The Redial on No Answer setting selects the number of times the fax accessory redials
if the number dialed does not answer. The number of retries is either 0 to 1 (used in
the U.S.) or 0 to 2, depending on the location setting. The interval between retries is
set by the Redial Interval setting.
Redial on Busy The Redial on Busy setting selects the number of times (0 through 9) the fax accessory
redials a number when the number is busy. The interval between retries is set by the
Redial Interval setting.
Redial Interval The Redial Interval setting selects the number of minutes between retries if the
number dialed is busy or not answering, or if an error occurs.
NOTE: You might observe a redial message on the control panel when both the
Redial on Busy and Redial on No Answer settings are set to off. This occurs when the
fax accessory dials a number, establishes a connection, and then loses the connection.
As a result of this error condition, the fax accessory performs three automatic redial
attempts regardless of the redial settings. During this redial operation, a message
displays on the control panel to indicate that a redial is in progress.
ENWW Change fax configurations 171