HP Color LaserJet Enterprise Flow M776z All-In-One Laser Printer - Manual (Page 31)

Table 1-20 Dimensions for the base printer with the printer stand (continued)
Dimension Printer and accessories fully closed Printer and accessories fully opened
Depth 1 712 mm (28 in) 1230 mm (48.4 in)
Width 1 585 mm (23 in) 1051 mm (41.4 in)
Weight 1 89.9 kg (198.2 lb) 89.9 kg (198.2 lb)
1 Does not include stability feet.
Power consumption, electrical specifications, and acoustic emissions
In order to operate properly, the printer must be in an environment that meets certain power specifications.
See www.hp.com/support/colorljM776MFP for current information.
CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert
operating voltages. This will damage the printer and void the printer warranty.
Operating-environment range
In order to operate properly, the printer must be in an environment that meets certain specifications.
Table 1-21 Operating-environment specifications
Environment Recommended Allowed
Temperature 15° to 27°C (59° to 80.6°F) 10° to 32.5°C (50° to 90.5°F)
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Printer hardware setup and software installation
For basic setup instructions, see the Hardware Installation Guide that came with the printer. For additional
instructions, go to HP support on the web.
Go to www.hp.com/support/colorljM776MFP for HP's all-inclusive help for the printer, which includes the
following information:
● Install and configure
● Learn and use
● Solve problems
● Download software and firmware updates
● Join support forums
● Find warranty and regulatory information
● Find instructions about how to use the Microsoft Add Printer tool
ENWW Printer hardware setup and software installation 17