Thermal probe and 210e connections, Introduction, 12 thermal probe and 210e connections – GE Industrial Solutions Galaxy Power Systems User Manual
Page 165: Introduction 12-1
Installation Guide for Galaxy Power Systems
Issue 12 August 2012
Thermal Probe and 210E Connections 12 - 1
12
Thermal Probe and 210E
Connections
Introduction
This section provides procedures for installing thermal probes or 210E
Thermal Probe Multiplexer modules in Millennium and Vector
controller systems.
Galaxy Power Systems must be installed, serviced, and operated only by
skilled and qualified personnel who have the necessary knowledge and
practical experience with electrical equipment and who understand the
hazards that can arise when working on this type of equipment. Refer to
the controller manuals for additional connections.
Caution
Wear grounded antistatic wrist straps when installing thermal probes
or 210E modules. A wrist strap (408157105) is provided with each
controller. The wrist strap must contact the skin and is not to be worn
over clothing.