Setting the low-voltage battery disconnect feature – GE Industrial Solutions Galaxy Power Systems User Manual
Page 199
Advertising
Installation Guide for Galaxy Power Systems
Issue 12 August 2012
Power Up and Installation Completion 15 - 15
Setting the Low-Voltage Battery Disconnect Feature
Setting the LVBD Feature
Step
Action
1
To enable LVBD, enter the appropriate key sequence:
• Galaxy Millennium Controller:
Main
Config LVD (Basic) or Low V Disc
(Intelligent)
Contactor 1 Type-Battery Enter
• Galaxy Vector Controller:
Main
Configuration Contactors Contactor 1
Type (Set to Battery) Save
Note: The LVBD configuration must be set. No alarm lights
will show if this is not set.
Continued on next page.
Advertising