5 cabinet floor mounting and battery stand, Connection – GE Industrial Solutions Galaxy Power Systems User Manual
Page 47
Installation Guide for Galaxy Power Systems
Issue 12 August 2012
Cabinet Floor Mounting and Battery Stand Connection 5 - 1
5
Cabinet Floor Mounting and
Battery Stand Connection
Refer to the following figures for the procedures in this section:
Figure No.
Illustrates
5-1
Footprint for Galaxy Power System (GPS) without a
battery stand
5-2
Footprint for European battery stand
5-3
Half-height cabinet on a European battery stand
5-4
Footprint for 12IR125/12IR125LP battery stand
5-5
Half-height cabinet on a 12IR125 battery stand
5-6
Half-height cabinet on a 12IR125LP (Low Profile)
battery stand
5-7
Footprint for 2VR375 battery stand
5-8
Half-height cabinet on a 2VR375 battery stand
5-9
Footprint for 2VR250 battery stand
5-10
Half-height cabinet on a 2VR250 battery stand
5-11
Half-height cabinet on a Unigy module assembly
5-12
Details of the cabinet installation procedure
5-13
Central office ground for full-height cabinet
5-14
Central office ground for half-height cabinet
5-15
Cable rack arrangements